CADOUX LIMITED
IRW-PRESS: FYI Resources Limited: FYI Resources Inc.: Weitere Bohrergebnisse bei Cadoux
verdeutlichen Eignung des Rohmaterials für HPA-Raffinierung
Weitere Bohrergebnisse bei Cadoux verdeutlichen Eignung des Rohmaterials für
HPA-Raffinierung
FYI Resources Limited (FYI oder das Unternehmen) freut sich, die restlichen Analyseergebnisse des
jüngsten RC-Bohrprogramms beim zu 100 Prozent unternehmenseigenen Kaolinprojekt Cadoux
(EL/4673) in Western Australia bekannt zu geben.
Die Analyseergebnisse bestätigen die hochgradige Beschaffenheit der Ressource bei Cadoux und
unterstützen die Auffassung von FYI hinsichtlich der Qualität und der Eigenschaften des
Kaolins als geeignetes Rohmaterial für die Produktion von hochreinem Aluminiumoxid (HPA)
(Aluminiumoxid mit einer Reinheit von 99,99 Prozent) unter Anwendung eines innovativen
Prozessfließschemas, das zurzeit vom Unternehmen verfeinert wird.
Obwohl es aufgrund der verspätet eingetroffenen Analyseergebnisse zu geringfügigen
Verzögerungen bei den metallurgischen Testarbeiten gekommen ist, geht die allgemeine
Fließschemaentwicklung weiterhin gut voran, wobei die technischen Erfolge die Erwartungen der
Manager in der vorläufigen Machbarkeitsstudie übertreffen.
Es wurden insgesamt 75 RC-Bohrlöcher auf 1.613 Metern abgeschlossen. Alle Bohrlöcher
waren vertikal und wurden bis in Tiefen von zwölf bis 36 Metern gebohrt. Die meisten
Bohrlöcher durchschnitten eine Mächtigkeit von über vier Metern Kaolin, wobei mehrere
Abschnitte Mächtigkeiten von über 27 Metern Kaolin ergaben. Die Bohrungen umfassten
Folgendes:
- 46 Bohrlöcher wurden gebohrt, um einen Teil der bestehenden Mineralressource in einem
Bohrabstand von 50 mal 50 Metern zu ergänzen.
- 20 Zaunbohrlöcher wurden im Umfeld der bestehenden Ressourcen gebohrt, jenseits des zuvor
erprobten Gebiets.
- Sechs Zwillingsbohrlöcher wurden gebohrt, um die Ergebnisse der vorangegangenen Phase der
Luftbohrungen zu überprüfen.
- Drei Bohrlöcher wurden bei der restlichen Mineralressource in Abständen von 100 mal
100 Metern gebohrt.
- Nun, da alle Analyseergebnisse eingetroffen sind, werden zwei Arbeiten unverzüglich
durchgeführt:
- Metallurgische Testarbeiten der Variabilität und Finalisierung von
Kosten-Nutzen-Rechnungen
- Zusammenstellung der Analyseergebnisse und deren Integration in ein überarbeitetes
Ressourcenmodell für das Kaolinprojekt Cadoux durch den unabhängigen geologischen Berater
von FYI, CSA Global. Die überarbeitete Mineralressource wird veröffentlicht werden, sobald
sie abgeschlossen ist.
http://www.irw-press.at/prcom/images/messages/2018/43927/ASX-FYI further assays
received_de1_PRCOM.001.jpeg
Das Bohrprogramm wurde als Schlüsselkomponente zur Ergänzung des metallurgischen
Studienprogramms von FYI sowie zur Entwicklung einer soliden HPA-Produktionsstrategie konzipiert.
FYI wird die Raffinierung des HPA-Prozessfließschemas fortsetzen und die
HPA-Produktionsstrategie weiterentwickeln.
Die Ergebnisse des letzten Probensatzes sind in Tabelle 1 unten angegeben.
CXRC-028 - Typisches Boden- und Kaolinprofil beim Projekt Cadoux
Roland Hill, Managing Director von FYI, sagte hinsichtlich der zusätzlichen Ergebnisse: Die
restliche Analyse der RC-Bohrungen stimmt mit den Ergebnissen der vorangegangenen Programme
überein und unterstützt weiterhin unsere Meinung hinsichtlich der äußerst
günstigen Eigenschaften der Lagerstätte Cadoux als Quelle von Rohmaterial für das
innovative HPA-Fließschema, das wir zurzeit entwickeln. Das Verständnis der Geologie und
der Mineralogie des Projekts ist von grundlegender Bedeutung für den Erfolg der
HPA-Raffinierung und wir sind mit der Qualität der Ergebnisse hinsichtlich unserer
Entwicklungsstrategie sehr zufrieden.
http://www.irw-press.at/prcom/images/messages/2018/43927/ASX-FYI further assays
received_de1_PRCOM.002.jpeg
Nähere Informationen erhalten Sie über:
Roland Hill
Geschäftsführer
roland.hill@fyiresources.com.au
Tel: 0414 666 178-
Simon Hinsley
Investor & Media Relations
Tel: 0401 809 653
simon@nwrcommunications.com.au
Über FYI Resources Limited
FYI positioniert sich derzeit als wichtiger Hersteller von hochreinem Aluminiumoxid (4N oder HA)
auf dem sich rasch weiterentwickelnden Markt für LED, Elektrofahrzeuge, Smartphone- und
Fernsehbildschirme und sonstigen verwandten Märkten für High-Tech-Produkte.
Grundlage für die von FYI Resources gewählte Aluminiumoxid-Strategie bilden die
hervorragende Qualität der Aluminiumoxid-(Kaolin)-Lagerstätte im unternehmenseigenen
Kaolinprojekt Cadoux in Westaustralien sowie die positive Reaktion des Rohstoffes auf das vom
Unternehmen gewählte HCl-Flowsheet (mittlere Temperatur, atmosphärischer Druck). Die
Strategie des Unternehmens überzeugt mit qualitativ hochwertigen Eigenschaften, die in
Kombination ein Aluminiumoxid-Projekt mit erstklassigem Potenzial ergeben.
Erklärung der kompetenten Person
Informationen in dieser Pressemitteilung, die sich auf die Mineralressource bei Cadoux beziehen,
basieren auf Informationen in den Pressemitteilungen des Unternehmens vom 8. Mai und 26. Juli 2017
und können auf der Website des Unternehmens unter www.fyiresources.com.au aufgerufen werden.
Informationen, die sich auf Mineralressourcen beziehen, basieren auf Informationen von Andrew
Kohler, einer kompetenten Person (Competent Person) und einem Mitglied des Australasian Institute of
Mining and Metallurgy. Herr Kohler ist ein Angestellter von Strategic Resource Management und ein
Berater des Unternehmens. Die Mineralressourcenschätzung entspricht den Empfehlungen des
Australian Code for Reporting of Mineral Resources and Ore Reserves (2012) des Joint Ore Reserves
Committee (JORC). Herr Kohler stimmt der Integration des Berichts in Form und Inhalt zu. Das
Unternehmen bestätigt, dass keine neuen Informationen oder Daten vorliegen, die sich erheblich
auf die in der ursprünglichen Marktmitteilung enthaltenen Informationen auswirken könnten,
und dass alle grundlegenden Annahmen und technischen Parameter, die die Schätzungen in der
entsprechenden Marktmitteilung untermauern, weiterhin gelten und sich nicht grundlegend
geändert haben.
Informationen in dieser Meldung, die sich auf Explorationsergebnisse beziehen, basieren auf
Informationen, die von Andrew Kohler erstellt wurden. Herr Kohler verfügt über eine
ausreichende Erfahrung, die für diese Art von Mineralisierung und Lagerstätte sowie
für seine Tätigkeiten erforderlich ist, um als kompetente Person (Competent Person)
gemäß der Ausgabe von 2012 des Australasian Code for Reporting of Exploration Results,
Mineral Resources and Ore Reserves definiert werden zu können. Die Explorationsergebnisse
entsprechen den Empfehlungen des Australian Code for Reporting of Mineral Resources and Ore Reserves
(2012) des Joint Ore Reserves Committee (JORC). Herr Kohler stimmt der Integration des Berichts in
Form und Inhalt zu.
Die Ausgangssprache (in der Regel Englisch), in der der Originaltext veröffentlicht wird,
ist die offizielle, autorisierte und rechtsgültige Version. Diese Übersetzung wird zur
besseren Verständigung mitgeliefert. Die deutschsprachige Fassung kann gekürzt oder
zusammengefasst sein. Es wird keine Verantwortung oder Haftung für den Inhalt, die Richtigkeit,
die Angemessenheit oder die Genauigkeit dieser Übersetzung übernommen. Aus Sicht des
Übersetzers stellt die Meldung keine Kauf- oder Verkaufsempfehlung dar! Bitte beachten Sie die
englische Originalmeldung auf www.sedar.com, www.sec.gov, www.asx.com.au/ oder auf der
Firmenwebsite!
TABLE 1
FYI RC drilling results - 2 metre composites (balance from May 2018 program refer to announcement
25 June 2018 for initial results)
ELEMENTAl2O3Fe2O3K2O LOI MgO MnO P2O5 SiO2 TiO2
S
UNITS % % % % % % % % %
DETECTI0.01 0.01 0.01 0.01 0.01 0.01 0.0020.01 0.01
ON
METHOD FB1/XFB1/XFB1/X/TGA FB1/XFB1/XFB1/XFB1/XFB1/X
RF RF RF RF RF RF RF RF
SAMPLE
NUMBER
S
Hole# CXRC050 (from 4m- 22m)
10596 21.267.11 0.1 8.66 0.12 X 0.00561.680.86
10597 12.441.24 0.05 4.75 0.07 X 0.00280.260.74
10598 25.450.78 0.09 9.35 0.06 X 0.06 63.2 0.68
10599 9.68 0.7 0.03 3.63 0.04 X 0.00684.770.95
10600 30.170.76 0.14 11.2 0.09 X 0.19 55.521.48
10565 26.550.74 0.15 9.88 0.15 X 0.08962.010.4
10566 22.250.85 0.16 8.33 0.07 X 0.07367.650.41
10567 20.311.22 2.24 6.59 0.07 0.01 0.07668.430.52
10568 18.011.16 4.97 4.23 0.08 0.01 0.07969.840.58
Hole# CXRC053 (from 4m - 30)
10608 8.79 0.89 0.07 3.28 0.08 X 0.00486.290.66
10609 6.9 0.5 0.02 2.52 0.04 X 0.00489.290.67
10610 28.331.1 3.57 8.16 0.91 X 0.05155.771.51
10611 5.81 0.41 0.01 2.2 0.04 X 0.00690.210.9
10612 15.8 0.77 0.1 5.67 0.05 X 0.01876.581
10613 25.320.79 0.11 9 0.06 X 0.02364.060.48
10615 28.140.93 0.1 10.010.07 0.01 0.02360.150.55
10614 26.390.4 0.29 9.47 0.05 X 0.01863.180.15
10616 27.620.66 0.75 9.63 0.05 0.01 0.03760.330.5
10617 18.560.73 3.41 5.22 0.04 0.02 0.03 70.510.83
10618 20.160.67 3.63 5.7 0.05 0.01 0.02568.6 0.61
10619 19.220.97 4.75 4.88 0.04 0.01 0.03569.230.53
10620 17.770.75 4.95 4.28 0.04 0.01 0.03571.3 0.36
10621 18.630.77 4.75 4.04 0.17 0.01 0.05469.8 0.32
Hole# CXRC046 (from 4m - 32m)
10512 10.320.54 0.05 3.87 0.05 X 0.01483.271.69
10513 28.470.89 0.04 10.160.05 0.01 0.07358.781.29
10514 28.690.68 0.07 10.350.06 0.01 0.10158.361.4
10515 26.980.96 0.08 9.63 0.05 0.02 0.07160.961.28
10516 26.790.56 0.08 9.8 0.05 0.02 0.07661.2 1.25
10517 23.451.22 0.38 8.45 0.07 0.01 0.07665.320.57
10518 20.350.65 1.54 6.78 0.05 X 0.07969.910.27
10519 23.890.78 1 8.31 0.05 0.02 0.14164.161.11
10520 22.540.75 1.91 7.5 0.05 0.01 0.14865.8 0.93
10521 19.871.72 2.7 6.09 0.04 0.02 0.09668.5 0.76
10522 21.461.07 1.62 7.26 0.04 0.02 0.07567.051.03
10523 19.761.68 2.6 6.06 0.04 0.02 0.05 68.040.96
10524 18.620.6 3.74 5.21 0.03 0.02 0.04570.040.91
10525 21.482.5 1.38 6.85 0.26 0.03 0.11664.741.42
Hole# CXRC047 (from 4m - 26m)
10530 28.4 1.11 3.56 8.16 0.92 X 0.05255.651.51
10531 12.041.94 0.16 4.61 0.12 X 0.01 79.840.76
10532 6.59 0.68 0.07 2.46 0.05 X 0.00689.130.78
10533 6.24 0.52 0.02 2.29 0.04 X 0.00689.361.16
10534 32.950.58 0.08 11.820.07 X 0.02453.610.78
10535 33.580.54 0.1 11.940.09 X 0.03952.380.97
10536 27.890.65 0.74 9.73 0.2 X 0.03559.391.02
10537 26.770.84 1.02 9.22 0.17 0.01 0.05 60.161.11
10538 29.480.46 0.64 10.410.08 X 0.05457 1.01
10539 27.090.77 1.2 9.3 0.06 0.02 0.03959.961.16
10540 27.120.56 1.85 9.14 0.06 0.01 0.07359.651.19
10541 22.631.53 2.57 6.92 0.2 0.02 0.25163.471.38
Hole# CXRC048 (from 4m-24m)
10545 13.987.81 0.12 6.56 0.16 X 0.00670.080.79
10546 10.230.97 0.03 3.97 0.06 X 0.00282.9 0.99
10547 7.29 0.68 0.03 2.79 0.05 X 0.00387.990.64
10548 9.89 0.5 0.02 3.8 0.04 X 0.00784.3 0.96
10549 25.811.08 0.09 9.23 0.06 0.01 0.01362.430.68
10551 26.750.83 0.45 9.41 0.06 X 0.01561.320.71
10552 21.930.76 2.31 6.88 0.07 0.01 0.02367.510.59
10553 20.120.89 2.83 6.19 0.06 0.01 0.04768.910.69
10554 18.370.78 4.46 4.72 0.05 0.01 0.08870.490.44
10555 15.332.33 4.82 1.33 0.5 0.02 0.04271.440.37
Hole# CXRC049 (from 4m - 16m)
10559 8.5 2.93 0.04 3.48 0.04 X 0.00384.7 0.56
10560 23.623.48 0.11 9.09 0.08 X 0.00262.930.59
10561 23.092.13 1.6 8.09 0.06 X 0.00364.060.51
10562 18.8 2.35 3.99 5.15 0.14 0.01 0.01668.180.45
10563 15.933.07 4.77 2.77 0.51 0.02 0.03570.180.35
Hole# CXRC051 (from 6m- 30m)
10574 10.521.31 0.04 4.07 0.07 X 0.00382.740.92
10575 6.57 0.75 0.04 2.48 0.04 X 0.00488.381.05
10576 24.810.95 0.09 8.96 0.06 X 0.03663.331.14
10577 28.081.04 0.16 10.020.08 0.01 0.05358.821.16
10578 25.380.94 0.09 8.99 0.06 0.01 0.04862.821.06
10579 26.021.1 0.12 9.26 0.06 0.01 0.05561.431.39
10580 29.2 0.99 0.09 10.440.07 0.01 0.05757.940.85
10581 25.940.67 2.04 8.42 0.05 0.01 0.14160.9 1.14
10582 25.790.6 2.76 8.1 0.05 0.02 0.17260.011.46
10583 21.961.04 0.89 7.54 0.07 0.01 0.22 66.351.26
10584 23.871.68 3.21 6.46 0.72 0.02 0.20760.871.21
10585 18.940.97 4.56 3.67 0.19 0.01 0.16268.4 0.68
Hole# CXRC052 (from 4m - 24m)
10588 16.426.39 0.15 6.81 0.15 X 0.00568.860.75
10589 11.150.88 0.03 4.14 0.07 X 0.00482.141.26
10591 6.59 0.63 0.01 2.38 0.04 X 0.00389.3 0.8
10592 9.22 0.58 0.02 3.37 0.04 X 0.01584.641.87
10593 26.880.86 0.06 9.82 0.08 0.01 0.07660.281.5
10601 23.631.2 0.15 8.59 0.07 0.01 0.09364.271.2
10602 25.691.27 0.29 9.33 0.07 0.02 0.15660.841.68
10603 23.521.15 1.07 8.23 0.07 0.02 0.11663.651.4
10604 23.592.55 1.78 7.21 0.79 0.03 0.12860.181.51
10605 16.754.85 2.78 2.54 1.89 0.04 0.06764.921.03
Hole# CXRC054 (from 4m - 13m)
10624 13.431.36 0.09 5.13 0.12 X 0.00579.120.7
10625 6.2 0.47 0.02 2.36 0.04 X 0.00888.881.92
10626 11.321.01 0.11 4.36 0.08 X 0.01381.361.63
10627 32.130.58 0.18 11.570.08 X 0.03653.791.58
10628 18.181.6 0.16 6.82 0.1 X 0.01771.741.49
Hole# CXRC055 (from 4m - 26m)
10632 11.991.13 0.07 4.54 0.14 X 0.00681.140.76
10633 6.47 0.55 0.02 2.44 0.05 X 0.00788.951.42
10634 10.590.67 0.03 3.94 0.05 X 0.01182.541.66
10635 19.331.14 0.09 7.17 0.07 X 0.01970.341.68
10636 20.891.18 1.12 6.94 0.06 0.01 0.04968.740.74
10637 23.570.79 0.52 8.24 0.06 0.01 0.08 64.841.11
10638 25.330.76 0.97 8.54 0.07 0.01 0.08962.511.08
10639 26.510.63 0.74 9.27 0.08 0.01 0.06961.241.08
10640 28.540.68 1.79 9.53 0.06 X 0.06358.270.74
10641 21.650.85 3.43 6.38 0.07 X 0.08166.151.12
10642 22.451.55 2.99 6.82 0.11 X 0.08 64.620.83
Hole# CXRC056 (4m - 20m)
10645 5.69 0.69 0.03 2.07 0.04 X 0.00590.640.55
10646 4.82 0.63 0.02 1.69 0.03 X 0.00991.2 1.44
10647 28.740.59 0.08 10.3 0.06 X 0.02759.321.02
10648 27.520.56 0.11 9.74 0.05 0.01 0.02560.790.6
10649 24.550.91 0.15 8.52 0.04 0.02 0.03864.720.6
10650 28.441.11 3.59 8.08 0.93 X 0.05355.711.52
10651 24.361.02 1.66 7.78 0.11 0.01 0.06364.640.3
10652 21.1 1.36 2.26 6.5 0.06 0.01 0.07167.940.4
10653 22.191.06 2.62 6.76 0.06 0.01 0.06266.530.35
Hole# CXRC057 (4m - 22m)
10656 8.07 1.63 0.06 3.36 0.11 X 0.00785.311.13
10657 27.733.59 0.06 10.510.15 X 0.02556.790.67
10658 27.711.64 0.09 10.2 0.11 X 0.03359.1 0.56
10659 29.931.2 0.13 10.860.08 X 0.03456.760.58
10660 26.981.1 0.33 9.7 0.08 X 0.04960.840.71
10661 26.221.18 0.15 9.47 0.09 0.01 0.05362.120.92
10662 25.061.78 0.9 8.8 0.12 0.02 0.04661.950.87
10663 23.441.76 1.2 8.14 0.13 0.02 0.05364.080.94
10664 21.762.18 1.47 7.42 0.11 0.07 0.08765.311.32
Hole# CXRC058 (from 4m - 12m)
10668 7.46 0.89 0.03 2.81 0.08 X 0.00587.451.25
10669 12.988.55 0.06 5.82 0.42 X 0.02 71.4 0.66
10671 24.632.78 0.08 9.25 0.15 X 0.09261.2 1.29
10672 22.7 3.75 1.21 8.23 0.2 X 0.23761.531.55
Hole# CXRC059 (from 10m - 21m)
10678 22.942.6 0.13 9.37 0.12 X 0.03563.910.79
10679 29.481.89 0.08 11.140.07 0.02 0.09355.421.45
10680 20.861.21 0.54 7.48 0.06 X 0.09868.710.52
10681 18.360.93 3.24 5.43 0.05 X 0.05370.810.51
10682 19.731.06 3.32 5.65 0.12 0.01 0.07 68.4 0.42
10683 15.371.91 5.1 1.75 0.51 0.02 0.02571.330.39
Hole# CXRC060 (from 8m - 30m)
10688 22.7 3.16 0.1 9.16 0.15 X 0.00563.480.89
10689 14.162.46 0.09 5.55 0.07 X 0.02675.851.39
10690 28.411.11 3.57 8.22 0.92 X 0.05355.681.51
10691 28.612.57 0.12 10.860.09 X 0.06356.610.7
10692 25.351.13 0.17 9.25 0.06 X 0.05962.920.83
10693 26.921.22 0.13 9.86 0.06 0.01 0.16360 1.18
10694 33.8 1.45 0.17 12.590.09 0.01 0.31449.381.55
10695 21.691.09 1.82 7.15 0.05 0.01 0.18566.240.93
10696 22.391.2 2.98 6.79 0.06 0.01 0.11864.850.7
10697 17.040.58 5.43 3.29 0.06 0.01 0.10271.660.48
10698 18.450.87 6.01 4.07 0.06 0.01 0.11368.640.69
10699 18.2 1.85 7.74 2.76 0.44 0.02 0.13565.390.96
Hole# CXRC061 (from 8m - 26m)
10704 11.710.77 0.04 4.33 0.05 X 0.00781.920.67
10705 16.491.04 0.07 5.98 0.04 X 0.09274.960.81
10706 22.261.1 0.1 7.99 0.04 X 0.18467.020.63
10707 21.571.14 0.13 7.67 0.04 0.01 0.32667.640.67
10708 24.6 2.48 0.59 8.82 0.14 X 0.10161.490.92
10709 20.441.16 0.45 7.05 0.05 0.01 0.06769.390.7
10711 20.671.14 3.06 6.13 0.05 0.01 0.10468.170.59
10712 17.750.75 4.45 4.57 0.05 X 0.09571.520.4
10713 19.082.05 3.1 3.22 0.75 0.03 0.13966.470.86
Hole# CXRC062 (from 6m - 29m)
10717 8.53 0.77 0.02 3.17 0.05 X 0.00586.680.86
10718 8 0.42 X 2.97 0.03 X 0.00487.770.62
10719 18.951.05 0.05 6.74 0.05 0.01 0.01572 0.98
10720 20.451.4 0.11 7.2 0.05 0.01 0.01369.950.64
10721 23.421.24 0.12 8.35 0.05 0.01 0.02265.570.96
10722 22.291.2 0.12 7.88 0.05 0.01 0.04267.830.8
10723 23.751.05 0.23 8.61 0.04 X 0.05464.660.97
10724 23.670.94 0.75 8.42 0.05 X 0.06864.451.19
10725 20.431.03 2.26 6.65 0.05 X 0.05468.260.75
10726 14.141.98 5.62 1.23 0.13 0.01 0.05772.830.32
10727 21.531.06 2 7.15 0.04 0.01 0.06166.930.77
10728 18.741 4.51 4.56 0.08 0.01 0.07369.280.58
Hole# CXRC063 (from 6m - 34m)
10730 28.381.06 3.55 8.22 0.93 X 0.05455.511.52
10733 8.81 0.7 0.03 3.37 0.05 X 0.00386.420.65
10734 8.47 0.53 0.04 3.14 0.04 X 0.01186.710.92
10735 29.780.92 0.08 10.630.05 0.01 0.01957.870.69
10736 28.050.52 0.52 10.050.06 X 0.04659.670.55
10737 28.260.51 0.9 10.030.05 X 0.09558.9 0.49
10738 22.510.61 2.8 6.93 0.05 0.01 0.04165.870.56
10739 19.310.56 3.76 5.47 0.04 0.01 0.03169.740.57
10740 21.070.59 3.78 5.98 0.03 0.01 0.05467.450.57
10741 19.620.51 4.38 5.15 0.04 0.01 0.07168.630.64
10742 20.040.65 4.09 5.63 0.04 0.01 0.06367.510.88
10743 21.071.11 2.97 6.57 0.04 0.04 0.15564.8 2.16
10744 17.420.78 4.91 4.43 0.04 0.01 0.11670.680.6
10745 16.7 0.62 5 4 0.04 0.01 0.10272 0.6
10746 19.040.81 4.58 5.08 0.06 0.01 0.09269.040.96
Hole# CXRC064 (from 6m - 36m)
10752 6.62 0.4 0.02 2.51 0.04 X 0.00689.490.93
10753 8.07 0.57 0.02 3.02 0.03 X 0.00887.710.79
10754 26.8 1.1 0.08 9.63 0.05 0.01 0.01661.630.65
10755 29.390.67 0.2 10.790.04 X 0.03258.110.55
10756 23.130.67 1.56 7.79 0.05 0.01 0.03565.540.63
10757 18.760.72 3.25 5.45 0.03 0.01 0.03170.650.6
10758 16.840.8 3.93 4.47 0.04 0.01 0.03772.920.57
10759 23.710.5 3.05 7.29 0.04 0.01 0.04 64.650.42
10760 20.550.99 3.67 5.71 0.04 0.02 0.04367.920.43
10761 18.9 0.51 4.24 5.09 0.04 0.01 0.06 69.820.5
10762 19.040.65 4.35 5.06 0.04 0.01 0.06 69.990.54
10763 17.970.91 4.66 4.46 0.04 0.01 0.13 70.150.51
10764 18.750.69 4.25 5.09 0.04 0.01 0.07869.8 0.54
10765 18.870.86 4.33 5.05 0.04 0.01 0.06469.520.49
10766 20.460.97 4.2 5.82 0.04 X 0.07867.230.57
Hole# CXRC065 (from 4m - 20m)
10769 6.58 0.71 0.05 2.6 0.04 X 0.00688.7 0.99
10770 6.06 0.6 0.08 2.34 0.04 X 0.00989.451.44
10771 28.550.61 0.11 10.390.06 X 0.03158.911.29
10772 29.590.62 0.15 10.780.06 X 0.06456.761.82
10773 28.771.12 0.45 10.280.09 0.02 0.08457.021.79
10774 23.290.78 2.29 7.7 0.07 0.03 0.08763.8 1.42
10775 24.241.95 2.51 8.09 0.09 0.03 0.11660.561.69
10776 18.411.62 4.44 5.03 0.08 0.03 0.06769.260.55
Hole# CXRC066 (from 4m - 18m)
10779 7.64 0.66 0.07 2.85 0.05 X 0.00687.681.13
10780 6.91 0.55 0.05 2.57 0.04 X 0.00688.691.1
10781 21.590.79 0.43 7.67 0.08 X 0.03368.220.72
10782 24.011.25 1.16 7.94 0.06 0.02 0.04463.991.08
10783 24.570.93 1.82 8.17 0.05 0.01 0.07562.861.04
10784 23.491.21 2.4 7.6 0.06 0.01 0.08863.720.96
10785 20.061.79 3.31 6.04 0.06 0.03 0.16266.9 0.85
Hole# CXRC067 (from 4m - 15m)
10788 18.280.92 0.06 6.79 0.08 X 0.01973.390.67
10789 28.7 1.18 0.16 10.550.06 X 0.02458.040.94
10790 28.421.11 3.55 8.15 0.93 X 0.05455.631.54
10791 28.392.3 0.15 10.540.09 X 0.07557.441.07
10792 27.9 1.82 0.19 10.290.09 X 0.10958.121.14
10793 24.3 1.53 0.41 8.75 0.07 X 0.08864.3 0.64
10794 19.781.81 0.68 6.66 0.07 0.02 0.04470.970.17
Hole# CXRC068 (from 6m - 23m)
10798 8.59 0.71 0.07 3.26 0.06 X 0.00486.190.96
10799 20.561.54 0.03 7.77 0.06 X 0.01968.061.23
10800 28.271.31 0.08 10.340.09 X 0.16258.791.08
10801 24.481.44 1.23 8.47 0.09 X 0.16162.171.34
10802 23.320.71 2.51 7.6 0.07 X 0.28263.431.44
10803 25.2 0.88 1.94 8.37 0.07 0.01 0.23960.981.49
10804 21.021.04 3.36 6.11 0.06 0.01 0.09667.180.84
10805 19.511.72 3.18 5.8 0.09 0.02 0.16567.151.57
10806 17.372.48 3.35 3.88 0.34 0.03 0.14168.491.41
Hole# CXRC069 (from 6m - 28m)
10811 15.1 2.06 0.07 5.66 0.12 X 0.00775.931.18
10812 22.322.02 0.05 8.41 0.1 X 0.02666.430.75
10813 23.721.63 0.05 8.75 0.06 X 0.05465.160.54
10814 22.910.95 0.08 8.28 0.06 X 0.09166.750.58
10815 22.340.93 0.08 8.04 0.05 0.01 0.10867.580.57
10816 20.860.71 0.08 7.61 0.06 0.01 0.08370.080.46
10817 20.940.7 0.28 7.65 0.06 0.01 0.23268.690.65
10818 19.760.72 2.15 6.49 0.05 0.01 0.11869.720.56
10819 19.471.09 3.68 5.41 0.05 0.01 0.14768.620.76
10820 18.2 1.02 5.07 4.44 0.05 0.01 0.10569.560.81
10821 17.241.54 4.62 3.17 0.18 0.02 0.13470.940.48
Hole# CXRC070 (from 4m - 18m)
10824 19.6119.050.07 9.61 0.12 X 0.01 50.710.81
10825 15.2 8.61 0.19 6.79 0.17 X 0.01168.120.9
10826 19.073.54 0.18 8.44 0.34 X 0.00967.170.74
10827 17.095.52 0.18 8.09 0.32 X 0.01267.830.56
10828 23.834.28 0.16 9.57 0.28 X 0.03260.810.91
10829 20.1716.320.73 9.31 0.24 0.01 0.13251.831.12
10830 28.331.12 3.59 8.29 0.92 X 0.05355.521.51
Hole# CXRC072 (from 2m - 10m)
10839 25.3 4.96 0.08 9.6 0.12 X 0.00658.7 0.77
10840 24.073.24 0.05 9.06 0.06 X 0.00463.020.78
10841 20.632.16 0.08 7.44 0.04 X 0.00469.550.45
10842 22.422.04 0.28 8.22 0.07 X 0.00666.9 0.33
Hole# CXRC073 (4m - 16m)
10846 12.913.31 0.09 5.1 0.14 X 0.00677.860.81
10847 12.692.8 0.16 4.85 0.1 X 0.00779.130.48
10848 17.850.99 1.86 5.59 0.05 X 0.00673.280.31
10849 18.931.09 2.45 5.82 0.06 X 0.00771.440.25
10851 16.212.04 4.62 3.2 0.1 X 0.01 73.030.22
10852 17.282.04 4.35 3.82 0.31 0.01 0.01 70.330.4
Hole# CXRC074 (from 4m - 18m)
10856 10.642.05 0.07 4.4 0.1 X 0.00579.490.73
10857 22.022.05 0.11 8.5 0.08 X 0.01965.8 1.02
10858 23.692.05 0.14 8.62 0.07 X 0.02365.061.17
10859 27.812.06 0.14 9.8 0.06 X 0.03859.961.25
10860 26.592.06 0.17 9.49 0.05 X 0.03561.441.3
10861 23.772.07 1.99 7.68 0.05 0.01 0.07164.271.04
10862 24.482.07 1.16 8.62 0.17 0.01 0.19761.521.46
Hole# CXRC075 (from 4m - 15m)
10866 12.952.08 0.08 5.25 0.15 X 0.00576.870.71
10867 13.812.08 0.1 5.58 0.17 X 0.00675.850.82
10868 23.242.09 0.13 8.28 0.07 X 0.01366.450.67
10869 31.042.09 0.31 11.210.08 X 0.03 55.060.82
10870 28.392.09 3.59 8.21 0.92 X 0.05355.5 1.51
10871 24.652.10 1.56 8.37 0.23 0.02 0.03461.751
10872 19.772.10 2.66 6.57 1.22 0.06 0.03261.590.86
Appendix 1
JORC Code 2012 Edition - Table 1
Section 1 Sampling Techniques and Data
Criteria Commentary
Sampling Reverse Circulation (RC) chip samples were
techniques collected at 1m intervals from a cone splitter
mounted on the side of the RC rig. 75% of the
sample volume from each drilled metre was
collected in a 900x600mm green plastic bag, and
the remaining 25% of volume is used to generate
a split sample which is collected in a 200x150mm
calico bag and then placed into a green plastic
bag and sealed to retain sample moisture. The
split samples were collected directly from the
cyclone / splitter because the samples for assay
are also measured for insitu moisture. The
samples were composited into 2m samples
(generated from the drill rig cone splitter) and
sent to Intertek for sampling analysis +
moisture testing.
Drilling RC was employed on the drilling program using a
techniques 450 Schramm drill rig with KL rod handler, auto
maker/breaker slips table, rig-mounted cone
sampling system and with hammer and blade bit
capabilities. Both hammer and blade drilling was
employed on various selected holes to gauge
variability and quality of sample return as well
as to compare with repeat holes from previous
drilling.
Drill sample Sample recoveries from the RC drilling were
recovery weighed and measured and sizes recorded
demonstrating that sample recovery from all
holes was of an acceptable standard. Photos of
separate chip (cuttings) trays were also taken
to demonstrate the lithology profile of the
hole
. Selected samples were also tested for moisture
content - allowing a greater confidence in
sample return quality and for specific gravity
testing.
Logging Chip tray samples were taken along with normal
logging procedures and protocols. 2 sets of
logging and sample correlation was conducted on
site during the drilling and sampling program.
The chip tray samples were non-sieved and dry
and photographed on a whole hole basis. All
holes were field logged by 1m intervals by a
qualified geologist for a variety of geological
qualities, characteristics and definition.
Sub-sampling All sampling procedures for the RC drilling have
techniques been reviewed by a qualified geologist and is
and sample considered to be of a high standard. The RC
preparation drilling sampling procedure was 1m samples split
using a rig mounted cone splitter and collected
in marked plastic bags. A 2m composite sample
was generated from 1-2kg collected in small
calico bags which were then placed in small
green plastic bags. These were marked with
corresponding sample numbers. At regular and
adhoc intervals, repeat samples were taken and
noted as well as interspersed standard samples
of quartz (blank) and kaolin (standard) were
also included at a 1in 9 interval as sample
checks for QA/QC. All samples were sent to Perth
to Intertek for laboratory sampling interspersed
with the RC drilling program samples.
Larger (5-10kg) samples were collected in large
green plastic bags on a 1m sample basis and sent
to Independent Metallurgical Operations (IMO)
for further metallurgical testwork purposes. All
samples were dry. 715 1-2kg samples (including
repeats and standards) totalling 1613 metres of
drilling were brought back to Perth for testing.
Total sample returns were measured by weighing
and estimating return volume percentages. All
samples were dry other than the occasional
sample that may have been affected by water
introduced by the driller to remove pipe
blockages.
The 2 m composite samples were generated from the
rig mounted cone splitter ensuring equal amounts
were collected from each metre, thus giving a
homogeneous volume for each metre in the
composites. Samples were submitted to Intertek
laboratories in Perth, Western Australia for
XRF analysis methods on a range of elements and
kaolin parameters as well as testing for insitu
moisture (LOM/DR).
Mr Kohler has reviewed the QAQC data and has
found it to be of high
standard.
Quality of Analysis for Sizing, SiO2, Al2O3, Fe2O3, TiO2,
assay data CaO, MgO, K2O, Na2O, P2O5, Mn3O4, Cr2O3 and LOI,
and was completed using XRF methods in a globally
laboratory recognised analysis laboratory. All of the
tests inserted repeat samples, duplicates, blanks and
standards are within tolerance of the original
assay and without bias. Mr Kohler reviewed
internal QAQC reports and analysis and confirms
that all assay data used is of high industry
standard for quality assurance/quality control
procedures.
Verification The drilling program designed by CSA Global also
of sampling included verification drilling and sampling of
and the previous Air Core drilling program that was
assaying completed in May 2017. The verification included
6 repeat RC holes against the previous Air Core
holes.
Location of All drill holes used in the resource estimate
data have been accurately surveyed by a licenced
points contract surveyor (+/-10cm accuracy). The collar
locations were also checked by the site
geologist using a Garmin GPS at site. The
vertically drilled holes (-90) were drilled to a
maximum of -34m and were followed up with down
hole surveying by Surtech Geophysical Services.
Data spacing 75 holes were drilled in approximately 1km square
and at approximately 50m spacings or 100m spacing
distribution between the previous Air Core drilling. This
resulted in a generally 50 x50m coverage of the
deposit area. The drill spacing was considered
suitable to establish both geological and grade
continuity for definition of Inferred Mineral
Resource. Samples were composited to 2m for
analysis.
Orientation The orientation of the drilling is approximately
of data in perpendicular to the strike and dip of the
relation to mineralisation and the risk of sample bias is
geological considered to be low.
structure
Sample All samples were under supervision from the rig
security to the laboratory. All residual sample material
is stored securely in sealed bags.
Audits or Mr Kohler has reviewed QAQC results and found the
reviews sampling and the sample handling techniques to
be of a high standard for the project QA/QC.
Section 2 Reporting of Exploration Results
Criteria Commentary
Mineral The granted Exploration Licence 70/4673 in Western
tenement Australia, covering an area of
and land 59km2
tenure
status
Exploration White Gold Kaolin (WGK) carried out all the
done by previous prospecting and drilling work that is on
other the tenement EL 70/4673. The previous aircore
parties drilling was comprised of 47 drill holes for
824m. The exploration work was carried out from
2011 to 2014.
Geology The project area is underlain by weathered
granitoid Archaean rock of the Yilgarn Granites
is the likely parent material for the kaolin.
Here, deep weathering of the feldspathic and
ferromagnesian minerals within the metamorphosed
granitic has resulted in the formation of
kaolinite. There is no outcrop but recognizable
granitoidal fragmental rocks are sometimes
present just below surface. The crust of the
overburden comprises gravel and sands over
reddish to off white clay. White kaolin
underlies the overburden followed by weathered,
partial oxidised and then fresh ganitoids at
depth. The recent drilling at the property has
revealed a weathering profile which is very
common in Western Australia with the granitoid
rocks, deeply weathered forming a leached,
kaolinized zone under a lateritic crust. Analysis
at the Laboratory shows particle
size distributions are typical of primary style
kaolins produced from weathered granites. The
crust of overburden comprises gravel and sands
over reddish to off-white clay to an average
depth of 5m. White kaolin then averages
approximately 16 m before orange to yellow sandy
and mottled clays are intersected which are
followed by recognizable rounded granitoid
material. The thickness of the kaolin profile
varies from less than 1m to a maximum of 28m.
Fresh granitoids are found at depths of between
10 and 30m. All kaolin resources are within 4 to
11 metres of the surface. 47 Air Core drillholes
with a total of 824m drilled in May 2017 with a
further Reverse Circulation drilling program
conducted in April 2018 consisting of 75 RC drill
holes totalling 1613 metres resulting in 715 2m
composite samples. All holes were drilled
vertically. Intersected kaolin thickness ranged
from
1-28m.
Drill hole 75 Reversce Circulation drill holes were drilled
Information on an approximate 50m x 50m pattern at -90 dip
and 0 degrees azimuth. The deepest hole was
approximately 35m deep with the average being
approximately 21.5m
deep.
Data Cadouxs geological model required a minimum
aggregation thickness intercept of 2m of kaolinite with the
methods requirement of having to be visually bright white
to be included in the estimate. Samples within
the wireframe were composited to 2m intervals
based on visually contiguous down-hole intervals.
The sample intervals were selected by the site
project Geologist. No high-grade cuts were
applied. Industry standard for Kaolinite cutoffs
are a maximum value of 0.7% Fe2O3, 0.5% TiO2 and
2% K2O. Assay results from drilling were all
lower than the cutoff values.
RelationshipAll drill holes are vertical (-90). The
between orientation of the drilling is approximately
mineralisat perpendicular to the strike and dip of the
ion widths mineralisation.
and
intercept
lengths
Diagrams Refer to figure 1
Balanced The reporting is considered to be balanced.
reporting
Other The normal high levels of QA/QC for the retrieving
substantive and recording of the field data and sampling
exploration techniques were observed by the attending field
data geologist (CSA).
The collar locations were planned by CSA prior to
the program and surveyed in by a qualified
surveyor. The drill rig was positioned on site by
the supervising senior geologist. The drill
collars were surveyed and RLs measured of the
actual collar post drilling.
Further workThere is little further geological definition work
to do on the project - other than to expand the
resource with further step-out drilling.
At the appropriate time - conversion of the
resource to a higher category will be required.
There has been sufficient work conducted at a
high degree of quality to allow for this
calculation to be done without further site
activity (ie
drilling).
http://www.irw-press.at/prcom/images/messages/2018/43927/ASX-FYI further assays
received_de1_PRCOM.003.jpeg
Figure 1: Kokardine Kaolin Resource outline and EL70/4673 boundary
Die englische Originalmeldung finden Sie unter folgendem Link:
http://www.irw-press.at/press_html.aspx?messageID=43927
Die übersetzte Meldung finden Sie unter folgendem Link:
http://www.irw-press.at/press_html.aspx?messageID=43927&tr=1NEWSLETTER REGISTRIERUNG:
Aktuelle Pressemeldungen dieses Unternehmens direkt in Ihr Postfach:
http://www.irw-press.com/alert_subscription.php?lang=de&isin=AU000000FYI5
Mitteilung übermittelt durch IRW-Press.com. Für den Inhalt ist der Aussender
verantwortlich.
Kostenloser Abdruck mit Quellenangabe erlaubt.
IRW-News: FYI Resources Limited: FYI Resources Inc.: Weitere Bohrergebnisse bei Cadoux verdeutlichen Eignung des Rohmaterials für HPA-Raffinierung
Am 09. Juli 2018 um 11:10 Uhr
Teilen
Teilen
