IRW-PRESS: Cape Lambert Resources Limited: Cape Lambert Resources Ltd.: Beginn der Kartierungen
im Kupfer-Kobalt-Projekt Kasombo in der Demokratischen Republik Kongo

Beginn der Kartierungen im Kupfer-Kobalt-Projekt Kasombo in der Demokratischen Republik Kongo


Es wurden Kartierungsarbeiten im Projekt Kasombo in der Demokratischen Republic Kongo (DRC)
durchgeführt. 

Es wurde ein weiterer Mineralisierungstypus ermittelt, der Potenzial für eine deutliche
Erweiterung der Lagerstätte birgt.

Die Ergebnisse der Probenahme in Mineralisierungshorizonten und Brekziengestein liegen vor.

Laut Bericht enthalten Proben aus der Zone Kasombo 7 hochgradige Kobaltwerte von 6,99 % und 1,57
%.

Das Ausschreibungsverfahren für Bohrungen wurde abgeschlossen, die Bohrungen sollen diese
Woche starten.

Fe Limited (Company) (ASX: FEL) freut sich bekannt zu geben, dass das Unternehmen vor kurzem
geologische Kartierungen und Probenahmen im Kupfer-Kobalt-Projekt Kasombo (Projekt Kasombo)
absolviert hat und am 13. Dezember 2017 ein erstes Bohrprogramm einleiten wird. 
Im Rahmen der Generalversammlung des Unternehmens am 3. November 2017 haben die Aktionäre
der Übernahme des Projekts  Kasombo von Cape Lambert Resources Limited (ASX: CFE)(Cape Lambert)
zugestimmt. Cape Lambert ist ein Großaktionär von FEL und hält derzeit 44,66 % des
ausgegebenen Aktienkapitals. 

Das Projekt Kasombo umfasst drei Mineralisierungszonen mit 600 Hektar Gesamtfläche - Kasombo
5, 6 und 7 -, die in zwei genehmigte Bergbaukonzessionsgebiete - PE 481 und PE 4886 - eingebunden
sind und sich im Kupfergürtel Katanga (KCB) in rund 25 km Entfernung von Lubumbashi, der
zweitgrößten Stadt der Demokratischen Republik Kongo, befinden. 

Die Kartierungsarbeiten im Projekt Kasombo fanden von 2. - 11. November 2017 statt und
konzentrierten sich zunächst auf die Zonen Kasombo 6 und 7. Weitere Kartierungen in der Zone
Kasombo 5 sind noch im Gange. 

Ein Bericht zu den Kartierungsarbeiten wurde abgeschlossen und ein erstes RC-Bohrprogramm in
kleinem Maßstab wurde geplant. 

Während der Kartierungsarbeiten sondierte das Unternehmen auch andere Bereiche im
näheren Umfeld des Projekts Kasombo, um die Möglichkeit der Erweiterung des Projekts
Kasombo zu prüfen. 

Es wurden weitere Mineralisierungszonen in der Nähe der kartierten Bereiche ermittelt und
das Unternehmen wird Verhandlungen mit dem Lizenzinhaber, La Generale des Carrieres et des Mines
(Gecamines), aufnehmen um festzustellen, ob diese Bereiche in das Projekt Kasombo eingegliedert
werden können.

Die Kartierungen haben zwei Mineralisierungstypen freigelegt: der erste entspricht einer
Mineralisierung, die für Lagerstätten im KCB typisch ist; der zweite weist querverlaufende
Brekzienstrukturen auf und birgt Potenzial für eine deutliche Ausweitung der Abgrenzungen der
Lagerstätte. 

Darüber hinaus hat das Unternehmen während der Kartierungsarbeiten zwanzig Proben,
größtenteils aus der Zone Kasombo 7, gesammelt.
Die Proben wurden zur Auswertung an das Labor von ALS Laboratories in Lubumbashi und
Südafrika übergeben.

Das Unternehmen hat nun die von ALS Laboratories ermittelten Probenergebnisse erhalten; die
Proben enthielten eine ausgeprägte Kobaltmineralisierung, wobei die Proben mit dem
höchsten Mineralisierungsanteil 6,99 % Kobalt (Probe A2914) und 1,57 % Kobalt (Probe A2916)
aufwiesen.

Eine Auswahl von Elementen aus dem Probengesamtpaket ist in Tabelle 1 aufgelistet.

Des Weiteren freut sich das Unternehmen bestätigen zu können, dass ein
Ausschreibungsverfahren für die Bohrungen abgeschlossen wurde. Der Auftrag für die
Umsetzung eines ersten RC-Bohrprogramms im kleinen Maßstab in den bekannten
Mineralisierungszonen erging an die örtliche Bohrfirma Rubaco Sarl. Ziel der Bohrungen ist es,
schon frühzeitig die Tiefe und den Erzgehalt innerhalb der Oxidationszonen feststellen zu
können. 

Die Bohrungen sollen am 13. Dezember 2017 eingeleitet und noch vor Jahresende abgeschlossen
werden. 

Im Hinblick auf den Beginn der Explorationsarbeiten meinte Chairman Tony Sage: Ich bin mit dem
Fortschritt der Explorationsarbeiten bei Kasombo zufrieden und zuversichtlich, dass das erste
Bohrprogramm entsprechende Einblicke in das Gesamtpotenzial der Zone Kasombo ermöglichen
wird.

Mit freundlichen Grüßen,
FE LIMITED
Tony Sage
Non-Executive Chairman

Wichtigste Punkte:

Börsensymbol Australian Securities Exchange: FEL
Stammaktien:
328.169.629
Nicht börsennotierte Optionen:
9.375.000
Board of Directors:
Tony Sage
Non-Executive Chairman
Kenneth Keogh 
Non-Executive Director
Nicholas Sage
Non-Executive Director

Kontaktdaten:
www.felimited.com.au 
32 Harrogate St, West Leederville
Westaustralien 6007 Australien 
Telefon  +61 8 6181 9793
E-Mail    info@felimited.com.au

Fe Limited ist ein Explorations- und Erschließungsunternehmen für Mineralressourcen
mit Sitz in Australien.

Fe Limited
ABN: 31 112 731 638

http://www.irw-press.at/prcom/images/messages/2017/41786/0314 - Mapping at Kasombo_Final
Draft_DE_PRCOM.001.jpeg


http://www.irw-press.at/prcom/images/messages/2017/41786/0314 - Mapping at Kasombo_Final
Draft_DE_PRCOM.002.jpeg
Standort des Projekts Kasombo und der nahegelegenen Verarbeitungsanlage Kipushi 



Lageplan Kasombo

http://www.irw-press.at/prcom/images/messages/2017/41786/0314 - Mapping at Kasombo_Final
Draft_DE_PRCOM.003.png
http://www.irw-press.at/prcom/images/messages/2017/41786/0314 - Mapping at Kasombo_Final
Draft_DE_PRCOM.004.png
http://www.irw-press.at/prcom/images/messages/2017/41786/0314 - Mapping at Kasombo_Final
Draft_DE_PRCOM.005.jpeg


Kleinbergbaubetrieb bei Kasombo 7 im Bereich der querverlaufenden Brekzienmineralisierung; rote
Linien markieren den Rand der Brekzie.

Stellungnahme des Sachverständigen

Die in diesem Bericht enthaltenen Informationen wurden von Jess Oram, Exploration Manager bei
Cauldron Energy und Mitglied des Australasian Institute of Geoscientists, gesammelt und aufbereitet.
Oram verfügt über ausreichende Erfahrungen, wie sie für den Mineralisierungstyp und
die Art der hier betrachteten Lagerstätte sowie die von ihm durchgeführten
Tätigkeiten wesentlich sind. Er verfügt somit über die entsprechenden
Qualifikationen, die ihn zum Sachverständigen gemäß den einschlägigen
australischen Richtlinien der Berichterstattung (Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves, Ausgabe 2012) befähigen. Oram stimmt zu, dass die
auf den einschlägigen Informationen basierenden Angaben in einer der Form und dem Kontext
entsprechenden Weise in den Bericht aufgenommen werden.

Unter folgendem Link finden Sie die vollständige englische Originalmeldung:
http://news.iguana2.com/macquaries/ASX/CFE/865060 

Die Ausgangssprache (in der Regel Englisch), in der der Originaltext veröffentlicht wird,
ist die offizielle, autorisierte und rechtsgültige Version. Diese Übersetzung wird zur
besseren Verständigung mitgeliefert. Die deutschsprachige Fassung kann gekürzt oder
zusammengefasst sein. Es wird keine Verantwortung oder Haftung: für den Inhalt, für die
Richtigkeit, der Angemessenheit oder der Genauigkeit dieser Übersetzung übernommen. Aus
Sicht des Übersetzers stellt die Meldung keine Kauf- oder Verkaufsempfehlung dar! Bitte
beachten Sie die englische Originalmeldung auf www.sedar.com, www.sec.gov, www.asx.com.au/ oder auf
der Firmenwebsite!

Table 1; Kasombo Project - sample location and assay 
AREA  LOCATION                  PREFERRED ASSAY          ME-MS6ME-MS6ME-MS6
                                                         1     1     1

ProspeEastiNorthiDatum  SampleCu_ppmCu_metCo_ppmCo_metFe_%  Mn_ppmPb_ppm
ct    ng   ng           ID          h           h

KAS_7 53397871021wgs84_zA2901 366   ME-MS64220  ME-MS61.54  3150  6.9
      0    4     35                 1           1

KAS_7 53397871022wgs84_zA2902 463   ME-MS63570  ME-MS64.26  2480  14.9
      0    3     35                 1           1

KAS_7 53399871024wgs84_zA2903 318   ME-MS63020  ME-MS62.43  1120  12.7
      0    0     35                 1           1

KAS_7 53399871024wgs84_zA2904 371   ME-MS68430  ME-MS67.83  1880  5.4
      0    0     35                 1           1

KAS_7 53401871023wgs84_zA2905 590   ME-MS62030  ME-MS64.08  4040  7.9
      2    3     35                 1           1

KAS_7 53399871026wgs84_zA2906 812   ME-MS68760  ME-MS648.1  5140  46
      4    0     35                 1           1

KAS_7 53406871022wgs84_zA2907 241   ME-MS6608   ME-MS63.84  944   4.5
      5    7     35                 1           1

KAS_7 53407871023wgs84_zA2908 2210  ME-MS67750  ME-MS67.4   18800 15.9
      3    0     35                 1           1

KAS_7 53399871021wgs84_zA2909 256   ME-MS61250  ME-MS62.66  1920  5.2
      7    2     35                 1           1

KAS_7 53401871022wgs84_zA2910 855   ME-MS63600  ME-MS68.04  5190  14.1
      0    3     35                 1           1

KAS_7 53402871024wgs84_zA2911 406   ME-MS62610  ME-MS65.19  4650  2.7
      2    4     35                 1           1

KAS_7 53399871027wgs84_zA2912 1010  ME-MS66960  ME-MS66.53  5930  7.7
      4    3     35                 1           1

KAS_7 53399871026wgs84_zA2913 925   ME-MS67120  ME-MS66.69  6670  7.4
      1    9     35                 1           1

KAS_7 53397871022wgs84_zA2914 5140  ME-MS669900 OG62  13.75 22300 21.2
      2    3     35                 1

KAS_7 53398871020wgs84_zA2915 1110  ME-MS65650  ME-MS62.85  15000 14.3
      0    4     35                 1           1

KAS_7 53397871021wgs84_zA2916 965   ME-MS615650 OG62  5.93  5620  10.7
      3    8     35                 1

KAS_8-53364870977wgs84_zA2917 83.9  ME-MS6110.5 ME-MS61.71  329   15.6
9     7    4     35                 1           1

KAS_8-53361870977wgs84_zA2918 64.6  ME-MS6101.5 ME-MS60.98  173   4.7
9     4    2     35                 1           1

KAS_8-53383870964wgs84_zA2919 103.5 ME-MS6197   ME-MS61.44  925   2.5
9     5    8     35                 1           1

KAS_6 53287870942wgs84_zA2920 644   ME-MS617    ME-MS61.73  59    6.9
      1    0     35                 1           1

KEY: KAS_7 is Kasombo 7 prospect, KAS_8-9 is area near Kasombo8 and Kasombo 9 prospects; KAS_^ is
Kasombo 6 prospect; 10,000 ppm is 1%; ALS analysis using a three acid digest with ICP-MS and ICP-AES
finish is ME-MS61; ALS method OG62 is over-range grade re-assay of ME-MS62.

http://www.irw-press.at/prcom/images/messages/2017/41786/0314 - Mapping at Kasombo_Final
Draft_DE_PRCOM.006.png



JORC Code, 2012 Edition - Table 1 Kasombo Mapping and Sampling
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation                    Commentary
Sampling · Nature and quality of sampling (eg cut · Samples were collected from
 techniqu channels, random chips, or specific      breccia and mineralized units
es                                                 identified from mapping and visual
         specialised industry standard             inspection.
          measurement tools appropriate to the
          minerals under investigation, such as   · Samples are selective across the
          down                                     observed
                                                   
         hole gamma sondes, or handheld XRF       mineralised zone
          instruments,                            · The sampling is appropriate to
                                                   gauge the levels of
         etc). These examples should not be taken  
          as limiting the broad meaning of        mineralisation possible, and will
          sampling.                                be used to
                                                   
         · Include reference to measures taken to prioritise drill targeting of
          ensure sample                            potential mineralized
                                                   zones
         representivity and the appropriate
          calibration of any measurement tools or · Sampling guided by visual
          systems                                  identification of
          used.                                    
                                                  both:
         · Aspects of the determination of mineralo strata conformable Cu-Co style min
         isation                                  eralisation
          that are Material to the Public Report.  typical of the Katangan copperbelt
         · In cases where industry standard     o breccia-style strata
          work has been done this would be         cross-cutting
          relatively simple                        
          (                                       mineralisation
         eg reverse circulation drilling was     · Detailed structural and
          used to obtain 1 m samples from which 3  stratigraphic mapping at 1:1000
          kg was                                   scale was completed; taking note
                                                   of
         pulverised to produce a 30 g charge for   
          fire assay). In other cases more       Katangan Sequence stratigraphy of
          explanation may be required, such as     the Lowe Roan
          where there is coarse gold that has      
          inherent sampling problems. Unusual     Supergroup and bedding orientations
          commodities or                          · Sampling selection completed on
                                                   the basis of
         mineralisation types (eg submarine        mapping
          nodules) may warrant disclosure of
          detailed
          information.

Drilling · Drill type (eg core, reverse           · No drilling conducted.
technique circulation, open-hole hammer, rotary
s         air blast, auger, Bangka, sonic,
          
         etc) and details (eg core diameter,
          triple or standard tube, depth of
          diamond tails, face-sampling bit or
          other type, whether core is oriented
          and if so, by what method,
          
         etc).
Drill    · Method of recording and assessing core · No drilling conducted.
 sample   and chip sample recoveries and results
 recovery assessed.

         · Measures taken to maximise sample
          recovery and ensure representative
          nature of the
          samples.

         · Whether a relationship exists between
          sample recovery and grade and whether
          sample bias may have occurred due to
          preferential loss/gain of fine/coarse
          material.

Logging  · Whether core and chip samples have     ·  No drilling conducted.
          been geologically and
          
         geotechnically logged to a level of
          detail to support appropriate Mineral
          Resource estimation, mining studies and
          metallurgical
          studies.

         · Whether logging is qualitative or
          quantitative in nature. Core (or
          
         costean, channel, etc) photography.
         · The total length and percentage of the
          relevant intersections
          logged.

Sub-sampl· If core, whether cut or sawn and       · No sub-sampling of material
was
ing       whether quarter, half or all core        undertaken subsequent to initial
 techniqu taken.                                   sample
es and
 sample  · If non-core, whether riffled, tube
 preparat sampled, rotary split,
ion       
         etc and whether sampled wet or dry.
         · For all sample types, the nature,
          quality and appropriateness of the
          sample preparation
          technique.

         · Quality control procedures adopted for
          all sub-sampling stages to
          
         maximise representivity of samples.
         · Measures taken to ensure that the
          sampling is representative of the in
          situ material collected, including for
          instance results for field
          duplicate/second-half
          sampling.

         · Whether sample sizes are appropriate
          to the grain size of the material being
          sampled.

Quality  · The nature, quality and                · Samples were prepared and
analysed
 of       appropriateness of the assaying and      by ALS; with samples crushed and
 assay    laboratory procedures used and whether   
 data     the technique is considered partial or  pulverised in ALS Lubumbashi, DRC
 and      total.                                   laboratory, and ICP-AES or ICP-MS
 laborato                                          finish in ALS Johannesburg
ry       · For geophysical tools, spectrometers,   laboratory.
 tests    handheld XRF instruments,
                                                  · Preparation: crush and pulverise s
         etc, the parameters used in determining  o that 80% of sample pass minus 80
          the analysis including instrument make   micron
          and model, reading times, calibrations
          factors applied and their derivation,   · ALS method ME-MS61, having a low
          etc.                                     lower level of
                                                   detection
         · Nature of quality control procedures
          adopted                                 · Over-range assay re-analysed by
          (                                        ALS ore grade method
         eg standards, blanks, duplicates,         OG-62
          external laboratory checks) and whether
          acceptable levels of accuracy           · Digest: four acid digest on a
          (                                        0.25g
         ie lack of bias) and precision have been  charge
          established.
                                                  · Element Suite (with lower level
                                                   of detection in brackets in
                                                   ppm)
                                                  : Ag(0.01), Al(100), As(0.2),
                                                   Ba(10),
                                                   
                                                  Be(0.05), Bi(0.01), Ca(100),
                                                   Cd(0.02), Ce(0.01), Co(0.1),
                                                   Cr(1), Cs(0.05), Cu(0.2), Fe(100),
                                                   Ga(0,05), Ge(0,05),
                                                   
                                                  Hf(0.1), In(0.005), K(100), La(0.5),
                                                   Li(0.2), Mg(100),
                                                   
                                                  Mn(5), Mo(0.05),  Na(100), Nb(0.1),
                                                   Ni(0.2), P(10),
                                                   
                                                  Pb(0.5), Rb(0.1), Re(0.002),
                                                   S(100), Sb(0.05),
                                                   
                                                  Sc(0.1), Se(1), Sn(0.2), Sr(0.2),
                                                   Ta(0.05),
                                                   
                                                  Te(0.05), Th(0.2), Ti(0.005),
                                                   Tl(0.02),
                                                   
                                                  U(0.1), V(1), W(0.1), Y(0.1),
                                                   Zn(2),
                                                   
                                                  Zr(0.5)
Verificat· The verification of significant        · No verification work has
been
ion of    intersections by either independent or   conducted.
 sampling alternative company
 and      personnel.
 assaying
         · The use of twinned holes.
         · Documentation of primary data, data
          entry procedures, data verification,
          data storage (physical and electronic)
          protocols.

         · Discuss any adjustment to assay data.
Location · Accuracy and quality of surveys used   · Samples were located with
of        to locate drill holes (collar and        handheld
 data poi down-hole surveys), trenches, mine       GPS
nts       workings and other locations used in    , having an accuracy of plus or
          Mineral Resource                         minus 10
          estimation.                              m
                                                  .
         · Specification of the grid system used.
         · Quality and adequacy of topographic
          control.

Data spac· Data spacing for reporting of          · Samples were taken wherever
minera
ing       Exploration                             lisation
 and dist Results.                                 was observed, in a random
ribution                                           distribution, but governed by the
         · Whether the data spacing and            presence of observable
          distribution is sufficient to establish  
          the degree of geological and grade      mineralization in a pattern
          continuity appropriate for the Mineral   governed by the
          Resource and Ore Reserve estimation      
          procedure(s) and classifications        mineralising system
          applied.                                · The data is not suitable for Miner
                                                  al
         · Whether sample compositing has been     R
          applied.                                esource estimation.

Orientati· Whether the orientation of sampling    · Samples are selective based
on
on of     achieves unbiased sampling of possible   exposure of
 data in  structures and the extent to which this  
 relation is known, considering the deposit       mineralisation
 to       type.
 geologic
al       · If the relationship between the
 structur drilling orientation and the
e         orientation of key
          
         mineralised structures is considered to
          have introduced a sampling bias, this
          should be assessed and reported if
          material.

Sample se· The measures taken to ensure sample    · Not applicable.
curity    security.

Audits   · The results of any audits or reviews   · Samples temporarily stored
then
 or       of sampling techniques and               transported to ALS Lubumbashi by
 reviews  data.                                    consulting group engaged by FE
                                                   Limited
                                                  .

Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria  JORC Code explanation                    Commentary
Mineral   · Type, reference name/number, location  · The licence is held by
state
 tenement  and ownership including agreements or    owned company
 and land  material issues with third parties such  
 tenure    as joint ventures, partnerships,        Gecamines and is the subject of a
 status    overriding royalties, native title       rights agreement between
           interests, historical sites, wilderness  
           or national park and environmental      Gecamines and Paragon SARL. Paragon
           settings.                                has a joint venture with Cape
                                                    Lambert Resources and Cape Lambert
          · The security of the tenure held at the  Resources has entered in to an
           time of reporting along with any known   agreement with Fe Limited to
           impediments to obtaining a               assign its rights to the
                                                    
          licence to operate in the area.          Kasombo Project to Fe Limited.

Exploratio· Acknowledgment and appraisal of        · Gecamines mapping completed
in
n done by  exploration by other                     1990s
 other     parties.                                .
 parties                                           ·

Geology   · Deposit type, geological setting and   · Cu-Co mineralisation of the
Katang
           style of                                an
                                                    style; where stratabound mineralisa
          mineralisation.                          tion
                                                    is located in the Lower Roan Superg
                                                   roup

                                                   · Breccia style cross-cutting Cu-Co

                                                   minerali
                                                   sation in vertically dipping
                                                    structures

Drill     · A summary of all information material  · The dataset has no
drilling.
 hole      to the understanding of the exploration
 Informati results including a tabulation of the
on         following information for all Material
           drill
           holes:

          o easting and northing of the drill hole
           collar

          o elevation or RL (Reduced Level -
           elevation above sea level in
           
          metres) of the drill hole collar
          o dip and azimuth of the hole
          o down hole length and interception depth
          o hole length.
          · If the exclusion of this information
           is justified on the basis that the
           information is not Material and this
           exclusion does not detract from the
           understanding of the report, the
           Competent Person should clearly explain
           why this is the
           case.

Data aggre· In reporting Exploration Results,      · No aggregation of results,
assay d
gation     weighting averaging techniques, maximum ata as reported by ALS is presented
 methods   and/or minimum grade truncations         for each sample
           (                                        location
          eg cutting of high grades) and cut-off   .
           grades are usually Material and should
           be
           
          stated.
          · Where aggregate intercepts incorporate
           short lengths of high grade results and
           longer lengths of low grade results,
           the procedure used for such aggregation
           should be stated and some typical
           examples of such aggregations should be
           shown in
           detail.

          · The assumptions used for any reporting
           of metal equivalent values should be
           clearly
           stated.

Relationsh· These relationships are particularly   · No mineralisation width is
ip         important in the reporting of            presented in these
 between   Exploration                              data
           Results.                                . 
mineralisa
tion      · If the geometry of the mineralisation w
 widths   ith respect to the drill
 and       
 intercepthole angle is known, its nature should
 lengths   be
           reported.

          · If it is not known and only the down
           hole lengths are reported, there should
           be a clear statement to this effect
           (
          eg down hole length, true width not
           known).

Diagrams  · Appropriate maps and sections (with    · Presented in the body of
the
           scales) and tabulations of intercepts    report
           should be included for any significant
           discovery being reported These should
           include, but not be limited to a plan
           view of drill hole collar locations and
           appropriate sectional
           views.

Balanced r· Where comprehensive reporting of all   · The sampling data is
selective
eporting   Exploration Results is not practicable,  and does not infer size of
           representative reporting of both low     mineralization; it does have some
           and high grades and/or widths should be  relationship to possible tenor of
           practiced to avoid misleading reporting  grade.
           of Exploration
           Results.

Other subs· Other exploration data, if meaningful  · Mapping work of Kasombo 5, 6
and
tantive    and material, should be reported         7 is currently being
 explorati including (but not limited to):          undertaken.
on         geological observations; geophysical
 data      survey results; geochemical survey
           results; bulk samples - size and method
           of treatment; metallurgical test
           results; bulk density, groundwater,
           geotechnical and rock characteristics;
           potential deleterious or contaminating
           substances.

Further wo· The nature and scale of planned        · 600 m of preliminary RC
drilling
rk         further work                             is currently in planning based on
           (                                        the results of the mapping and
          eg tests for lateral extensions or depth  sampling.
           extensions or large-scale step-out
           drilling).

          · Diagrams clearly highlighting the
           areas of possible extensions, including
           the main geological interpretations and
           future drilling areas, provided this
           information is not commercially
           sensitive.



Die englische Originalmeldung finden Sie unter folgendem Link: 
http://www.irw-press.at/press_html.aspx?messageID=41786
Die übersetzte Meldung finden Sie unter folgendem Link: 
http://www.irw-press.at/press_html.aspx?messageID=41786&tr=1

NEWSLETTER REGISTRIERUNG:

Aktuelle Pressemeldungen dieses Unternehmens direkt in Ihr Postfach: http://www.irw-press.com/alert_subscription.php?lang=de&isin=AU000000CFE0 Mitteilung übermittelt durch IRW-Press.com. Für den Inhalt ist der Aussender verantwortlich. Kostenloser Abdruck mit Quellenangabe erlaubt.